RGBtoHDMI Adapter Amiga500

RGMtoHDMI Adapter Amiga500

With this adapter, the RGB signals from the Amiga 500 are output to HDMI via a Raspberry Pi.
The adapter is installed in the Denise socket of the Amiga 500 and the Denise chip is plugged into the adapter.
We offer the adapter in 2 versions: Either the adapter only or as a complete set.
In the adapter-only version, the CPLD itself must be flashed, a Raspberry PI Zero plugged in and the software configured.
In the Plug&Play version, everything is included and configured for immediate use. By purchasing the adapter from us, you are actively supporting the project, as part of the proceeds go directly to the team!

Features

• For Amiga 500
• RGB to HDMI converter

Requirements

• Amiga 500
• SD card from 8GB
• Raspberry Pi Zero1 or Zero 2
• Software (see below) must be installed on the SD card.

Scope of delivery

• RGB to HDMI adapter for Amiga 500
• 4 screws and riser for mounting the Raspberry Pi Zero (mounted in the set)
• Raspberry Pi Zero 1 (optionally only mounted in the set)
• SD card 8GB with installed software (optional only in the set)
• FPV cable (flat ribbon) Mini HDMI plug (Raspi) to HDMI socket (only in set)

Documentation

• Documentation on the project can be found here: https://github.com/LinuxJedi/AmigaRGBtoHDMI/tree/main/Amiga2000CPLDSlot
• Software can be found here: https://github.com/hoglet67/RGBtoHDMI/wiki
• 8GB Retrobuddy’s image can be found here: https://www.retrobuddys.com/download/a500rgbhdmi.zip

The RGB to HDMI adapter was developed by @LinuxJedi Andrew Hutchings. We are happy to provide some support for this outstanding project. We manufacture the RGB to HDMI adapters in House.