Amiga 2000 internal Gotek drive with 0.96″ display & Rotary

Amiga 2000 internal Gotek drive with display, knob & USB stick AT435

6 different colors in 3.5″ or 5.25

USB Gotek Floppy Emulator to play ADF files directly from USB stick.

A 0.96″(24.38mm) OLED display with a resolution of 128×64 characters on up to 4 lines is installed. In addition, a rotary control for the convenient selection of the respective file.

How to use the Gotek drive?

It’s very simple: replace the original floppy drive with this USB floppy drive or connect it via external adapter. You need to copy your favorite ADF files to a USB stick on the PC.

In addition to the current file name, the OLED display provides further information about the loading process.

Scope of delivery:

• internal GOTEK USB Floppy Emulator with latest Flash Floppy+ firmware (3.38)
• Artery 435 chip (more internal memory)
• 0.96″ (24.38mm) OLED display with a resolution of 128×64 characters on up to 4 lines
• Amiga 2000 3D Print Frame for internal installation
• Knob with knob

Artery435:

This MCU runs with 288MHz and has 384kB SRAM. For comparison, the Artery415 MCU has only 32kb SRAM. The 384kb is sufficient for reliable operation, an extensive floppy cache and will allow a wider range of firmware features in the future. The extended firmware that runs on this MCU is called FlashFloppy PLUS (or FlashFloppy+).

Attention:

The drive with the 3D frame is intended for internal installation in the Amiga 2000.