PiStorm2K for Amiga 2000

PiStorm2K for Amiga 2000 *new version with EPM240 CPLD*

The PiStorm2K for the Amiga 2000 uses a Raspberry Pi as processor accelerator/”turbo card”, RTG graphics card and as hard disk interface on the Amiga 2000 and is specially designed for the coprocessor socket in the Amiga 2000.
A Raspberry Pi 3a+ is mandatory for operation, but not included in the standard package.
However, this can be ordered optionally from us.

Features

• For Amiga 2000
• 68020 (~23MIPS) with standard configuration and up to 68040 with ~2000 MIPS
• Multiple processor configuration options (68020/68030/68040)
• up to 512 MB memory
• RTG graphics card output with high resolution modes via HDMI.
• WLAN card to connect the Amiga to the Internet or a LAN (Musashi – does not yet work with EMU68)

Requirements

• Amiga 2000
• Kickstart 2.05, 3.0, 3.1, 3.1.4, 3.2, 3.2.1 or 3.2.2.
• SD card from 8GB
• PiStorm Github(https://github.com/captain-amygdala/pistorm)
• AmigaOS 3.1 or higher
• WinUAE for configuration on the PC
• Attention: The 68000 CPU in the Amiga2000 must be removed for correct operation

Optional

• Amiga OS 3.2.2.1 preconfigured on SD card
• CaffeineOS preconfigured on SD card
• USB + HDMI FPV extension cable

Scope of delivery

• PiStorm2K Adapter for Amiga 2000
• 3 x M2.5 8mm screws
• 3 x spacers (3D print)

Documentation

• Documentation on the project can be found here: https://github.com/captain-amygdala/pistorm
• Emu68 Software by Michal Schulz can be found here https://github.com/michalsc/Emu68

The PiStorm was developed by the team around Claude Schwarz, Michal Schulz and others. We are happy to provide support for this outstanding project.

We manufacture the PiStorm adapters in House.